STRUTS

Showing 1–24 of 31 results

Showing 1 – 30 of 31 results Showing all 31 results Showing the single result No results found
Sort by Popularity
Filters Sort results
Reset Apply
5mm Main Wire Strut Adapter Mount/ Wheel Axis 5mm
$10.50
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
AWS-0701-5-5
Brake Line Clip 3/8". Sized for 3/8" Diameter Struts. Get rid of those zip ties forever!. The perfect solution to routing those brake lines down your struts. Molded clips sized to fit almost every application. Clips sold 4pk. .
$6.00
Buy here
Max: 1378
Min: 1
Step: 1
Add to cart
BLC-38
Brake Line Clip 1/2". Sized for 1/2" Diameter Struts. Get rid of those zip ties forever!. The perfect solution to routing those brake lines down your struts. Molded clips sized to fit almost every application. Clips sold in 4 pack. This is the size used on PL-41200, and PL-11000 Pro-Link Struts. .
$6.00
Buy here
Max: 1058
Min: 1
Step: 1
Add to cart
BLC-12
Nitro Planes Falcon 120 Nose Struts The Pro-Link Falcon landing gear has been developed from the ground up specifically for the Falcon airframe with weight, reliability and durability in mind. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including Airpower, BVM, Intairco,and Tamjet Includes:. Specs:.
$67.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-160
Dreamworks 1/2" trunion mount
$149.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-21000
Pro-Link Ripmax Xcalibur Main Struts
$149.00
Buy here
Max: 3
Min: 1
Step: 1
Add to cart
PL-21800
Pro-Link Ripmax Xcalibur Nose Strut
$68.00
Buy here
Max: 1
Min: 1
Step: 1
Add to cart
PL-140
Brake Line Clip 3/4". Sized for 3/4" Diameter Struts. Get rid of those zip ties forever!. The perfect solution to routing those brake lines down your struts. Molded clips sized to fit almost every application. Clips sold in 4 pack. .
$6.00
Buy here
Max: 117
Min: 1
Step: 1
Add to cart
BLC-34
BVM Electra - Main Struts. These Pro-Link Electra trailing link struts are made specifically to fit into the BVM Air Blue Retract units in an Electra. Part of our design includes the acceptance of the fiberglass Strut Doors and BVM Brakes. BVM precision ground axles, nylon spacers, and E Clips are part of the package Includes:. Specs:. Dont be fooled by imitations! When only the best will do, Go Pro-Link!. . . Note: Use a #409 Dremel Disc to cut the axles to length and grind a flat spot to accept the set screw. Brakes are required for the turbine powered Electra.
$165.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-41220
Boomerang Nano Main Struts. The Pro-Link Nano landing gear has been developed from the ground up specifically for the Nano airframe with weight, reliability and durability in mind. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including Airpower, BVM, Intairco,and Tamjet Includes:. Specs:. . Dont be fooled by imitations! When only the best will do, Go Pro-Link!.
$149.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-11340
Nitro Planes Falcon 120 / Modellbau Tornado V2 Main Struts. The Pro-Link Falcon landing gear has been developed from the ground up specifically for the Falcon airframe with weight, reliability and durability in mind. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including Airpower, BVM, Intairco,and Tamjet Includes:. Specs:. . Dont be fooled by imitations! When only the best will do, Go Pro-Link!.
$149.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-21500
Trailing Link struts have been upgraded with our new heavy duty shoulder bolt to increase duarability and eliminate wear. These struts will handle all the abuse you can deliver! . Includes:. Specs:. Dont be fooled by imitations! When only the best will do, Go Pro-Link!.
$185.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-33140
Pro-Link Struts - Large Nose
$106.95
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-200
Dreamworks 1/4" pin small trailing link nose strut is designed with ourTaurus and Herculesseriesretracts in mindbut will fit any retract with 1/4" steering pin. Perfect for aircraft ranging from 12-24lbs. Includes:. Specs:. Applications:.
$67.00
Buy here
Max: 3
Min: 1
Step: 1
Add to cart
PL-100
Modellbau Tornado New V3/F86D Sabre Dog Nose Strut. The Pro-Link Modellbau Tornado V3/F86D Sabre Dog Nose Strut fits the latest version Modellbau Tornado V3 and the Modellbau F86D Sabre Dog airframes. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including Airpower, BVM, Intairco,and Tamjet Includes:. Specs:.
$68.00
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
PL-155
Pro-Link Main Struts / Trunion Upgrade - Composite ARF Lightning / Ultra Lightning. At Dreamworks, we do extensive R&D and real world testing when developing a gear package for a specific aircraft. Larger aircraft require struts that can handle the extra weight and abuse they typically are subjected to. With that in mind, we went through several design changes of our Lightning struts before we where satisfied with the performance and reliability. Our new Pro-LinkLighting struts are by far the most durable struts available. They will handle aircraft weight up to 55lbs off rough grass surfaces without bending, loosening or wearing! The Pro-Link lightning struts offer 1/2" trunion lock style mounting and 1/4" axle. Our Pro-Link Lightning Trunions are the perfect upgrade for the stock Behotec C-50 retracts, eliminating the pin-mounting method with a much more duarable 1/2" socket strut mount. This package will fit the Lightning and Ultra-Lightning versions. Includes:. Specs:. . When only the best will do, Go Pro-Link!.
$249.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-33120-0
Boomerang Nano Nose Strut. The Pro-Link Boomerang Nano landing gear has been developed from the ground up specifically for the Nano airframe with weight, reliability and durability in mind. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including BVM, Intairco,and Tamjet. To eliminate the needto block up the nose retractfor steering tiller clearance; we have developedour unique offset steering tiller assembly with matching servo wheel, no spacer blocks needed!. . Includes:. Specs:.
$67.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-130
These Pro-Link trailing link struts are specifically made for the BVM Bandit, Bandit ARF and BobCat kits. Throughly tested and BVM approved, These trailing link struts will almost eliminate flex plate breakage and lower the stress loads to the airframe and wing structure. Ideal for both paved and grass runway operation. Direct, no modificationreplacement for BVM’s Duro-Struts, fits BVM wheels and brakes Includes:. Specs:. Dont be fooled by imitations! When only the best will do, Go Pro-Link!.
$189.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-41200
Dreamworks 1/4" pinlarge trailing link nose strut. Perfect for aircraft ranging from 18-28lbs.
$95.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-250
Pro-Link Small Nose Strut - 3/16" Pin
$67.00
Buy here
Max: 6
Min: 1
Step: 1
Add to cart
PL-125
Pro-Link Ripmax Xcalibur PLUS Main Struts
$210.00
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
PL-32900
Pro-Link Tornado V2 Nose Strut WITH 1/4" PIN MOUNT. Includes:. Specifications:.
$72.00
Buy here
Max: 7
Min: 1
Step: 1
Add to cart
PL-170
Brake Line Clip 7/16". Sized for 7/16" Diameter Struts. Get rid of those zip ties forever!. The perfect solution to routing those brake lines down your struts. Molded clips sized to fit almost every application. Clips sold in 4 pack. .
$6.00
Buy here
Max: 402
Min: 1
Step: 1
Add to cart
BLC-716
The Pro-Link Torus strutshave been developed from the ground up specifically for the Boomerang Torus.Our Torus main Trailing Link struts have been upgraded with our new heavy duty shoulder bolt and locking clip to increase duarability and eliminate wear. These struts will handle all the abuse you can deliver! . Includes:. Specs:.
$180.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-33350
These Pro-Link trailing link struts are specifically made for the BVM KingCat. Throughly tested and BVM approved, These trailing link struts will almost eliminate flex plate breakage and lower the stress loads to the airframe in addition to improving ground handling. Ideal for both paved and grass runway operation. Our new revised Kingcat struts offer Zero Offset and larger rotation pin. Dreamworks “Pro-Links” are manufactured right here in the U.S. to exacting standards utilizing T-6 aluminum and steel components.. Includes:. Specs:. Dont be fooled by imitations! When only the best will do, Go Pro-Link!.
$180.00
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
PL-42110
Pro-Link Main Struts- Composite ARF Lightning / Ultra Lightning. At Dreamworks, we do extensive R&D and real world testing when developing a gear package for a specific aircraft. Larger aircraft require struts that can handle the extra weight and abuse they typically are subjected to. With that in mind, we went through several design changes of our Lightning struts before we where satisfied with the performance and reliability. Our new Pro-LinkLighting struts are by far the most durable struts available. They will handle aircraft weight up to 55lbs off rough grass surfaces without bending, loosening or wearing! The Pro-Link lightning struts offer 1/2" trunion lock style mounting and 1/4" axle. Will fit the Lightning and Ultra-Lightning versions. Includes:. Specs:. . When only the best will do, Go Pro-Link!.
$255.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-33120
Boomerang Sprint Nose Strut. The Pro-Link Boomerang Sprint Nose Strut has been developed from the ground up specifically for the Sprint airframe with weight, reliability and durability in mind. Our light weight, machined T-6 aluminumstruts will acceptseveral manufacturers wheel sets including Airpower, BVM, Intairco,and Tamjet Includes:. Specs:.
$65.00
Buy here
Max: 5
Min: 1
Step: 1
Add to cart
PL-150
Composite ARF Flash/Ultra Flash Main Struts Pin Mount
$180.00
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
PL-33100P
The Pro-Link zero offset main struts fit the Boomerang Elan/XL and C-ARF Flash/Euro
$180.00
Buy here
Max:
Min: 1
Step: 1
Add to cart
PL-33320
Dreamworks 1/4" pinlarge trailing link nose strut is designed with our Taurus and Hercules seriesretracts in mindbut will fit any retract with 1/4" steering pin. Perfect for aircraft ranging from 18-28lbs. Same as our standard large nose strut tandem nose fork. Includes:. Specs:.
$114.95
Buy here
Max: 5
Min: 1
Step: 1
Add to cart
PL-210
12