MKS SERVOS
Showing all 20 results
Filters
Sort results
Reset
Apply
 |
MKS-DS9910 |
||
 |
MKS HV747 Coreless Mini High Torque 8.4V Digital Servo. See aditional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HV747 |
|
 |
MKS DS6125-95 Long Metal Horns. |
MKS-DS6125-95 |
|
 |
HV1220 Digital High-Torque High Voltage Servo, with Titanium Gears, by MKS. See additional photos for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HV1220 |
|
 |
MKS-HBL3850 Servo. |
MKS-HBL3850 |
|
 |
Super Powerful High Voltage Mini servo. |
MKS-HV747R |
|
 |
MKS-HV9930 |
||
 |
DS1210 (0.12 sec/60° - 10 kg-cm (138.87 oz/in) @5.8V). |
MKS-DS1210 |
|
 |
HV69, the one you have been waiting for. |
MKS-HV69 |
|
 |
MKS DS1220 Titanium Gear Ultra High Torque Standard Digital Servo with 422oz @ 6.6v. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-DS1220 |
|
 |
MKS HV6130H Thin Digital Servo. Dead Band 0.001 ms. Control System +Pulse Width Control. Working Frequence 1520μs / 333Hz. Operating Voltage 3.5~8.4 V DC Volt (2S Lipo un-regulated). Operating Speed (6V) 0.14 sec/60° degrees at no load. Operating Speed (7.4V) 0.11 sec/60° degrees at no load. Operating Speed (8.4V) 0.10 sec/60° degrees at no load. Stall Torque (6V) 6 Kg/cm (83 oz/in). Stall Torque (7.4V) 7.6 Kg/cm (105.5 oz/in). Stall Torque (8.4V) 8.1 Kg/cm (112.5 oz/in). Motor Type Coreless Motor. Potentiometer Drive Direct Drive. Bearing Type 3x Ball Bearings + 2x Jewel Bearing. Gear Type Metal Alloy gear. Dimensions 30x10x29.8 mm (1.1811X0.39X1.17 in). Weight 23g (0.81oz). See additional images for dimensions. . |
MKS-HV6130H |
|
 |
MKS HV6130 Sailplane Thin Wing Digital Servo. Dead Band 0.001 ms. Control System +Pulse Width Control. Working Frequence 1520μs / 333Hz. Operating Voltage 3.5~8.4 V DC Volt (2S Lipo un-regulated). Operating Speed (6V) 0.14 sec/60° degrees at no load. Operating Speed (7.4V) 0.11 sec/60° degrees at no load. Operating Speed (8.4V) 0.10 sec/60° degrees at no load. Stall Torque (6V) 6 Kg/cm (83 oz/in). Stall Torque (7.4V) 7.6 Kg/cm (105.5 oz/in). Stall Torque (8.4V) 8.1 Kg/cm (112.5 oz/in). Motor Type Coreless Motor. Potentiometer Drive Direct Drive. Bearing Type 3x Ball Bearings + 2x Jewel Bearing. Gear Type Metal Alloy gear. Dimensions 30x10x29.8 mm (1.1811X0.39X1.17 in). Weight 23g (0.81oz). See additional images for dimensions. . |
MKS-HV6130 |
|
 |
MKS HV1250 Coreless High Speed 8.2V Digital Servo. See additional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.SKU MKS-HV1250. . |
MKS-HV1250 |
|
 |
HV777A+ Aluminum upper Casing (0.1 sec/60° - 40.40 kg.cm (561.1 oz/in) @8.2V). |
MKS-HV777A+ |
|
 |
MKS HV6100 High Torque Coreless Thin 8.4V Digital ServoSKU MKS-HV6100. See additional images for dimensions. . Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HV6100 |
|
 |
MKS HV93 High Speed Micro Digital Servo. See additional images for dimensions. Note: Not standard Futaba Spline. Use DS6125 Arms. |
MKS-HV93 |
|
 |
MKS HBL575SL X6 High Torque 8.2V Brushless ServoSKU MKS-HBL575SL. See additional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HBL575SL |
|
 |
MKS DS6125 Metal Horns. |
MKS-DS6125 |
|
 |
The all new MKS HBL6625 is our latest 10mm thick wing servo. This is a market first, bring Brushless motor technology into a 10mm thick wing servo!. Once you have tried MKS, you will know you have tried the very best!. Never has a glider servo been so accurate and tight! This is what we all have been searching for!!. The HBL6625 has a full CNC Aluminum case that has been milled to the highest of tolerances. See additional images for dimensions. Note: Not standard Futaba Spline. Use DS6125 Arms. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HBL6625 |
|
 |
HBL599 Digital Brushless Ultra Speed/Torque High Voltage Servo, w/Titanium Gears, by MKS. See additional images for dimensions. . Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HBL599 |