THUNDERBOLT RC

Showing all 23 results

Showing 1 – 23 of 23 results Showing all 23 results Showing the single result No results found
Sort by Popularity
Filters Sort results
Reset Apply
TBOLT Harness - 4 Servo 12" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 4 servos and features 12" extensions on each end (for a total length of 24").
$29.49
Buy here
Max: 4
Min: 1
Step: 1
Add to cart
TBOLT-124S
TBOLT Harness - 4 Servo 6" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 4 servo and features 6" extensions on each end (for a total length of 12").
$27.95
Buy here
Max:
Min: 1
Step: 1
Add to cart
TBOLT-64S
Heavy Duty Silicone Wire Servo Extension (24") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$4.99
Buy here
Max: 8
Min: 1
Step: 1
Add to cart
TBOLT-24S
Heavy Duty Silicone Wire Servo Extension (36") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$5.49
Buy here
Max: 7
Min: 1
Step: 1
Add to cart
TBOLT-36S
TBOLT Harness -2 Servo 6" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 2 servo and features 6" extensions on each end (for a total length of 12").
$16.49
Buy here
Max: 8
Min: 1
Step: 1
Add to cart
TBOLT-62S
Heavy Duty Silicone Wire Servo Extension (Y-Connect) This Y-Connect harness features a solid soldered joint that is heat shrink wrapped and then molded into a square plastic resin case. Each lead end is approximately 6" long. This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft. These extensions feature the following:.
$5.20
Buy here
Max: 15
Min: 1
Step: 1
Add to cart
TBOLT-YCS
TBOLT Harness - 3 Servo 12" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 3 servo and features 12" extensions on each end (for a total length of 24").
$23.95
Buy here
Max: 16
Min: 1
Step: 1
Add to cart
TBOLT-123S
Heavy Duty Silicone Wire Servo Extension (6") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$2.95
Buy here
Max: 21
Min: 1
Step: 1
Add to cart
TBOLT-6S
Heavy Duty Silicone Wire Servo Extension (42") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$5.99
Buy here
Max: 12
Min: 1
Step: 1
Add to cart
TBOLT-42S
TBOLT Harness - 2 Servo 12" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 2 servo and features 12" extensions on each end (for a total length of 24").
$16.49
Buy here
Max: 8
Min: 1
Step: 1
Add to cart
TBOLT-122S
Heavy Duty Silicone Wire Servo Extension (12") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$3.95
Buy here
Max: 13
Min: 1
Step: 1
Add to cart
TBOLT-12S
TBOLT Harness -1 Servo 6" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 1 servo and features 6" extensions on each end (for a total length of 12").
$9.95
Buy here
Max: 17
Min: 1
Step: 1
Add to cart
TBOLT-61S
Balance Lead JST-XH to JST-EH Ext 24" Adapter. Can be used to incorporate "Standard" XH Balance Lead Batteries to JetCat BMS Systems.
$7.50
Buy here
Max: 37
Min: 1
Step: 1
Add to cart
TBOLT-XHEH24
Balance Lead JST-XH to JST-EH Ext 12" Adapter. Can be used to incorporate "Standard" XH Balance Lead Batteries to JetCat BMS Systems.
$6.50
Buy here
Max: 32
Min: 1
Step: 1
Add to cart
TBOLT-XHEH12
Balance Lead JST-XH to JST-EH Ext 6" Adapter. Can be used to incorporate "Standard" XH Balance Lead Batteries to JetCat BMS Systems.
$5.00
Buy here
Max: 36
Min: 1
Step: 1
Add to cart
TBOLT-XHEH6
Balance Lead JST-EH to JST-XH Ext 24" Adapter. Can be used to convert/extend JetCat EH Style Balance to "Standard" XH Lead.
$7.50
Buy here
Max: 31
Min: 1
Step: 1
Add to cart
TBOLT-EHXH24
Balance Lead JST-EH to JST-XH Ext 12" Adapter. Can be used to convert/extend JetCat EH Style Balance to "Standard" XH Lead.
$6.50
Buy here
Max: 17
Min: 1
Step: 1
Add to cart
TBOLT-EHXH12
Balance Lead JST-EH to JST-XH Ext 6" Adapter. Can be used to convert/extend JetCat EH Style Balance to "Standard" XH Lead.
$5.00
Buy here
Max: 23
Min: 1
Step: 1
Add to cart
TBOLT-EHXH6
TBOLT Harness - 4 Servo 24" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 4 servos and features 24" extensions on each end (for a total length of 48").
$36.49
Buy here
Max: 30
Min: 1
Step: 1
Add to cart
TBOLT-244S
Heavy Duty Silicone Wire Servo Extension (18") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$4.49
Buy here
Max: 29
Min: 1
Step: 1
Add to cart
TBOLT-18S
Heavy Duty Silicone Wire Servo Extension (3") This servo extension is constructed with 22AWG Heavy Duty Silicone Wire, and is designed especially for Giant Scale R/C aircraft These extensions features the following:. .
$2.95
Buy here
Max: 15
Min: 1
Step: 1
Add to cart
TBOLT-3S
TBOLT Harness - 1 Servo 12" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 1 servo and features 12" extensions on each end (for a total length of 24").
$13.49
Buy here
Max: 29
Min: 1
Step: 1
Add to cart
TBOLT-121S
TBOLT Harness - 3 Servo 6" Extensions. These Multi Servo Wire Harnesses feature a pre-assembled Ashlok connector based Wire Harness that works with most standard servos. Connect you servo(s) to the Male end of the Harness end and connect your receiver to the Female end of the Harness. Use Standard Servo Extensions to obtain the length you require. Download the Thunderbolt RC Tutorial below for more details. . This Item is for 3 servo and features 6" extensions on each end (for a total length of 12").
$21.95
Buy here
Max: 15
Min: 1
Step: 1
Add to cart
TBOLT-63S