Servo Mounts & Arms

Showing 1–24 of 64 results

Showing 1 – 30 of 64 results Showing all 64 results Showing the single result No results found
Sort by Popularity
Filters Sort results
Reset Apply
Servo mount for standard servo.
$8.50
Buy here
Max: 30
Min: 1
Step: 1
Add to cart
STV-01701
BVM Brand Flush Wing Servo Mounts . 1 Pair Per Package.
$6.95
Buy here
Max:
Min: 1
Step: 1
Add to cart
BVM-5545
MPI Aluminum Servo Arm
$6.99-$11.95
Buy here
Max:
Min: 1
Step: 1
Add to cart
MPI-KAXX
JMP 0-Flex Servo Mount . Designed for turbine aircraft with their low vibration environment and high demand for control system accuracy. Machined from 6061-T6 aircraft aluminum with nylon mounting spacers. For JR-8411 servos. Works in any application where precision is a must. .
$16.95
Buy here
Max: 1
Min: 1
Step: 1
Add to cart
JMP-SM8411
JMP 0-Flex Servo Mount . Designed for turbine aircraft with their low vibration environment and high demand for control system accuracy. Machined from 6061-T6 aircraft aluminum with nylon mounting spacers. For Futaba BLS152 servos. Works in any application where precision is a must. .
$16.95
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
JMP-SM152
JR/DFA CNC Mind Servo Arm M3-1.0"
$8.99
Buy here
Max: 36
Min: 1
Step: 1
Add to cart
dfa-arm1.0

Spektrum Heavy Duty Aluminum Servo Arms are the perfect companion to your Spektrum outfitted model.

$12.99
Buy here
Max: 9
Min: 1
Step: 1
Add to cart
SPMSP3101
SECRAFT Precision Machined Heavy Duty Aluminium 6061-T6 (anodized) 1" Servo Arm for Hitec. Designed to clamp around the servo shaft and compensate for inconsistancies in the output shaft sizes. . Half arms are measured from the servo screw hole to the outside hole. Hitec: 24T(blue). Length :1.0inch(25.4mm). Fixing screw bolt is #4-40. Weight: 3.5g. 1 Per package. . Installation Guide. - Follow aircraft manufactures recommendation for Servo control horn set up. - LockTite all servo screws. - Install ball link on bottom of servo arm (where possible). - Keep all linkage tight. Note: SECRAFT servo arms should fit snug, and not just slip onto the output shaft. In fact they should go on about a 1/3 of the way with light pressure and use the screw to pull them down the rest of the way. We do this because we are all after the tightest linkage and if there is any play in the spline fit it will only get worse. If need be, place a drop of light oil in the servo arm hole being very careful not to get any oil in the servo screw hole to help get the arm in place. Remember oil in the servo screw hole will not let the Loctite work properly. We suggest the arm's be installed outside the aircraft and on a stable flat surface. .
$13.00
Buy here
Max: 5
Min: 1
Step: 1
Add to cart
SC-H100V3B-4
JMP 0-Flex Servo Mount . Designed for turbine aircraft with their low vibration environment and high demand for control system accuracy. Machined from 6061-T6 aircraft aluminum with nylon mounting spacers. For JR-8711 servos. Works in any application where precision is a must. .
$16.95
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
JMP-SM8711
Aluminum Sx Arm, 1.5" Futaba Key Features. .
$11.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
HAN9156
Aluminum Sx Arm, 1" Futaba Key Features. .
$10.99
Buy here
Max:
Min: 1
Step: 1
Add to cart
HAN9153
JR/DFA CNC Mind Servo Arm M3-1.25"
$12.99
Buy here
Max: 37
Min: 1
Step: 1
Add to cart
dfa-arm125
Alum sx Arm 2" (JR/SPM)
$11.99
Buy here
Max: 16
Min: 1
Step: 1
Add to cart
HAN9160
Micro Servo Arm XL-EFLRS75/FUT/HRC (6).
$9.36
Buy here
Max: 5
Min: 1
Step: 1
Add to cart
DUB-930
SECRAFT Servo Arm Remover.
$3.50
Buy here
Max:
Min: 1
Step: 1
Add to cart
SC-SAR
SECRAFT V3 Hitec 1" Servo Arm M3 - Blue.
$13.00
Buy here
Max: 4
Min: 1
Step: 1
Add to cart
SC-H100V3B-3
Fits Hitec Digital Servos.
$8.95
Buy here
Max: 21
Min: 1
Step: 1
Add to cart
HRC55701
Heavy Duty Composite Servo Arms ~ JRLONG. .
$16.42
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
DUB-671
Heavy Duty Composite Servo Arms ~ Hitec. .
$16.42
Buy here
Max: 2
Min: 1
Step: 1
Add to cart
DUB-672
Heavy-Duty 1/2 Servo Arm Short: FUT. . .
$7.95
Buy here
Max:
Min: 1
Step: 1
Add to cart
HAN-3537
SWB Double-Loc Servo Arm. - Hitec Full Arm 1.25"
$11.00
Buy here
Max: 12
Min: 1
Step: 1
Add to cart
SWB-H125FDL
JR/DFA CNC Mind Servo Arm M3-2.0"
$16.99
Buy here
Max: 14
Min: 1
Step: 1
Add to cart
dfa-arm200
JR/DFA CNC Mind Servo Arm M3-1.5"
$12.99
Buy here
Max: 20
Min: 1
Step: 1
Add to cart
dfa-arm150

Spektrum Heavy Duty Aluminum Servo Arms are the perfect companion to your Spektrum outfitted model.

$13.99
Buy here
Max: 3
Min: 1
Step: 1
Add to cart
SPMSP3102
Hitec Aluminum Servo Arms Made for Clevis - 3/4"
$9.50
Buy here
Max: 6
Min: 1
Step: 1
Add to cart
SWB-H0.75HDLCL
Hitec Aluminum Servo Arms Made for Clevis - 1"
$9.50
Buy here
Max: 6
Min: 1
Step: 1
Add to cart
SWB-H1.00HDLCL
$14.12
Buy here
Max: 6
Min: 1
Step: 1
Add to cart
DUB-3340
SECRAFT Precision Machined Heavy Duty Aluminium 6061-T6 (anodized) Servo Arm for Hitec.. . Half arms are measured from the servo screw hole to the outside hole. Material: aluminium 6061-T6 (anodized). . JR:23T(gold), Hitec:24T(blue), Futaba:25T(red). Length :1.0inch(25.4mm). Fixing screw bolt is M2. weight: 2.0g. 1 Per package. Bolt is not included. . Installation Guide. . - Follow aircraft manufactures recommendation for Servo control horn set up. . - LockTite all servo screws. . - Install ball link on bottom of servo arm (where possible). . - Keep all linkage tight. . - Servo arms longer than what is recommended can cause. . - The Hitec 8XXX series servos must use Futaba type. Note: SECRAFT servo arms should fit snug, and not just slip onto the output shaft. In fact they should go on about a 1/3 of the way with light pressure and use the screw to pull them down the rest of the way. We do this because we are all after the tightest linkage and if there is any play in the spline fit it will only get worse. If need be, place a drop of light oil in the servo arm hole being very careful not to get any oil in the servo screw hole to help get the arm in place. Remember oil in the servo screw hole will not let the Loctite work properly. We suggest the arm's be installed outside the aircraft and on a stable flat surface. .
$4.00
Buy here
Max: 1
Min: 1
Step: 1
Add to cart
SC-H100V1M2
Quality Gold-Pin R/C Connectors.
$3.50
Buy here
Max: 5
Min: 1
Step: 1
Add to cart
MPI-3430
Material: aluminium 6061-T6 (anodized). JR:23T(gold), Hitec:24T(blue), Futaba:25T(red). Length :1.5inch(38mm). Fixing screw bolt is M3 or #4-40. weight: 5g. 1 Per package. Bolt is not included. Installation Guide:. - Follow aircraft manufactures recommendation for Servo control horn set up. - LockTite all servo screws. - Install ball link on bottom of servo arm (where possible). - Keep all linkage tight. - Servo arms longer than what is recommended can cause. - The Hitec 8XXX series servos must use Futaba type.
$11.00
Buy here
Max: 1
Min: 1
Step: 1
Add to cart
SC-J150V2-4
123