Composite Materials
Showing all 20 results
Showing 1 – 20 of 20 results
Showing all 20 results
Showing the single result
No results found
Sort by Popularity
Filters
Sort results
Reset
Apply
Carbon Fiber Simulated ABS plastic sheet. ***Does not qualify forfree shipping***. . That carbon look without the radio interference associated with true carbon plate. Perfect for finishing off cockpits, dash panels and radio trays. New Size 12" x 24" for shipping convenience. Sheets are 1/16" thick and have removable protective coating to avoid scratching during fabrication. |
$20.95
Buy here Max: 153
Min: 1
Step: 1
Add to cart |
LAMCF |
|
G-10 EpoxyGlass Sheets ~ .020". |
$12.49
Buy here Max: 5
Min: 1
Step: 1
Add to cart |
G10-020 |
|
Protect your airframe with Dreamworks ceramic blanket. |
$19.95
Buy here Max: 72
Min: 1
Step: 1
Add to cart |
DW-CB |
|
BVM Milled Fiber. To strengthen glue joints. These 1/32" long fiberglass fibers will add strength to an epoxy glue joint. Milled fiber also thickens the glue mix so it will stay where you put it. A combination of some milled fiber with microballoons and resin will also yield a stronger fillet material. . |
$5.50
Buy here Max: 5
Min: 1
Step: 1
Add to cart |
BVM-1905 |
|
Carbon Mat 8.5" x 22" 1/2oz weight. 2 Per Pack. |
$14.75
Buy here Max: 3
Min: 1
Step: 1
Add to cart |
BVM-1705 |
|
G-10 EpoxyGlass Sheets ~ .010". |
$12.49
Buy here Max: 6
Min: 1
Step: 1
Add to cart |
G10-010 |
|
West System Reusable Mixing Sticks-8ea |
$7.00
Buy here Max: 1
Min: 1
Step: 1
Add to cart |
WS-804-8 |
|
Lightweight Fibreglass Cloth, 1.0 oz, 1sq Meter, White. |
$14.99
Buy here Max:
Min: 1
Step: 1
Add to cart |
DLMBD12 |
|
Lightweight Fibreglass Cloth, 2.0 oz, 1 Sq Meter, White. |
$18.95
Buy here Max: 1
Min: 1
Step: 1
Add to cart |
DLMBD14 |
|
Carbon Tow Cord - 15'. |
$8.50
Buy here Max: 4
Min: 1
Step: 1
Add to cart |
BVM-1510 |
|
G-10 EpoxyGlass Sheets ~ Assorted. |
$19.49
Buy here Max: 3
Min: 1
Step: 1
Add to cart |
G10-ASS |
|
G-10 EpoxyGlass Sheets ~ .015". |
$12.49
Buy here Max: 2
Min: 1
Step: 1
Add to cart |
G10-015 |
|
BVM Pin Hole Filler. Fiberglass preparation:. Wipe it on a fiberglass fuselage or resin finished wing surface before primer, allow to dry to a haze, then wipe it off. When you spray on the first coat of primer, most of the fine pin size holes have been filled reducing your finishing efforts. |
$8.75
Buy here Max: 3
Min: 1
Step: 1
Add to cart |
BVM-1925 |
|
Lightweight Carbon Tissue. |
$20.95
Buy here Max:
Min: 1
Step: 1
Add to cart |
DLMBD62 |
|
Lightweight Fibreglass Cloth, 1.5 oz, 1 Sq Meter, White. |
$14.99
Buy here Max: 9
Min: 1
Step: 1
Add to cart |
DLMBD13 |
|
Product Description. Key Features. . Overview. Hangar 9® UltraCote® is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: . Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F. |
$25.99
Buy here Max: 2
Min: 1
Step: 1
Add to cart |
HANU911 |
|
Product Description. Key Features. . Overview. Hangar 9® UltraCote® is a high tech polyester covering that features a unique multi temperature-controlled adhesive and shrinkage system, making it versatile and easy to apply. A patented polymerizing process permanently fuses the color to the polyester film covering, eliminating the possibilities of color-layer separation and permits repositioning the covering on your model. UltraCote's unique ability to both shrink and stretch make it superior to other coverings for going around tight curves and wingtips. Temp ranges are as follows: . Adhesion to wood begins at 200 to 220 degrees F. Shrinkage onset begins at 300 degrees F. Maximum shrinkage is at 350 degrees F. |
$28.99
Buy here Max: 1
Min: 1
Step: 1
Add to cart |
HANU910 |
|
Product Description. Key Features. |
$11.99
Buy here Max: 2
Min: 1
Step: 1
Add to cart |
HANU91100 |
|
Peal N Stick UltraCote® material |
$11.99
Buy here Max: 1
Min: 1
Step: 1
Add to cart |
HANU91000 |
|
G-10 EpoxyGlass Sheets ~ .005". |
$12.49
Buy here Max: 7
Min: 1
Step: 1
Add to cart |
G10-005 |