UniLight Lights Plus
Showing 1–24 of 275 results
Filters
Sort results
Reset
Apply
uniLIGHT BLACK.4. 4-Channel state of the art light controller: BLACK. |
UNL-MODULB4 |
||
10cm (5″) 22AWG twisted male to male servo lead Dreamworks Premium grade male to male servo leads. Available in 10 or 5 pks. DW-5-M2M   sku. (5pk) DW-10-M2M sku  (10pk.)... |
dw-5-M2M |
||
Sorry, but you do not have permission to view this content.
|
UNL-CABLEY3 |
||
 Univerasal suiteable and on weight optimized cable for Lightsystems, servos and bus lines. |
UNL-CABLE5.0 |
||
Heat conductive glue 5g. Heat conductive glue, white, similiar to silicone, 5g. Less expensive alternative to the silver based 2-component glue. 5g tube. |
UNL-GLUE5G |
||
Y-Cable. Ready assembled adapter cable with 1m length in order to operate two lights directly on the controller output without soldering. |
UNL-CABLEY |
||
UniLight Controller 8-Channel PRO. The system for all tasks! |
UNL-MOD83001 |
||
UniLight Wire Extensions . Extension for cables of the uniLIGHT System. every package contains two siliconcable with medium cross section, each with Male- and Female-Connector and a piece of shrinking hose for the fuse. |
UNL-CABLEXT10 |
||
Light Caps for smaller Profile Lights. A set of different light caps for self-building of luminaires and for covering of easy illuminants on your model. The caps consist of high-quality polycarbonate in contrast to deep-drawn products. They are impact resistant, much more temperature-resistant and varnishable. The set includes following caps:. 2 piece profile form slim 11mm. 3 piece round with 10mm. 2 piece of additional profile expansion. |
UNL-CAPSPRO |
||
UniLight DUAL NAV+STROBE, 15Wx2 - Red/White. |
UNL-DUAL1415RW |
||
Cable Set uniLIGHT. Our recommended cabling. The set contains a very robust and heat-resistant, twisted cables. One bundle of 3m cable and three bundles of 1m with an universal connector. The cable weight is 10g/m. |
UNL-CABLE |
||
4W PURE light, short - WHITE. Universal STROBE light for installation behind existing glass cap, mostly on wingtips or on the leading edge or special DIY solutions. The module is being delivered completely prewired on an aluminium heatsink. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. In delivery state, these lamps are only suitable for normal operation from 5 to 10 minutes when paying attention to a slight air flow. Please check operation temperatures after installation and ensure sufficient air cooling. . Technical Data:. Electricity: 4W reference power, 8(12)V, 0.35A. Beam angle: ~160°. Light intensity: ~50 Lumen RED. Light intensity: ~70 Lumen GREEN. Light intensity: ~100 Lumen WHITE. Dimension bolt : D7x15mm. Dimension chip: D8mm. Weight: 2g (without cable). Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed, mounting screws. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-PUREX040W |
||
4W Gears-Spotlight, 20mm. Flat spotlight with CNC manufactured aluminium reflector with 20mm diameter and assembly plate for horizontal cooling. Ideal on undercarriages or as pop-up spotlights. The enclosed heatsink can be glued on for improving operation time. The spotlight can be directly glued on the undercarriage leg with thermal conductive adhesive, then the mounting flange can be completely removed, so that only the reflector remains. Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 4W connection cable (accessories). Please ensure sufficient cooling air during operation. . Technical Data. Performance: 4W reference power. Voltage: 8V, use enclosed resistor for 12V. Electricity: 0.35A. Beam angle: ~100°. Light intensity: ~100 Lumen WHITE. Light intensity: ~95 Lumen WARMWHITE. Dimension: D20x39x9mm. Weight: 7g (without cable). Delivery: ready to use with 1m connection cable and additional resistor for 3S operation. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-SPOT20X4 |
||
Sorry, but you do not have permission to view this content.
|
UNL-MINIX4RT |
||
Locking cable connection, 6 primary 10 secondary pins |
UNL-CABLE-6P10S |
||
UniLight DUAL NAV+STROBE, 15Wx2 - Green/White. |
UNL-DUAL1415GW |
||
UniLight PRO STROBEn 26Wx2, SHORT - Red. |
UNL-PRO14260R |
||
UniLight Do It Yourself Crimp Connectors. |
UNL-CABLECONNECT |
||
4W position light, 11mm - RED. Budget position / navigation light of 11mm series is externally very slim design and fits optically to smaller models. The profile-shaped polycarbonate cap is plugged on delivery. This can be painted separately. The luminaire is fully assembled for use with 2S LiPo (about 8V). During operation with 3S (12V) of the enclosed resistor must be used as an alternative you can also use a 4W-3S adapter cable. Please note that high power LEDs can be very hot, up to 70 ° C is quite normal. These luminaires with heatsink enclosures are suitable for continuous operation, when an air flow is possible (in flight). If this is not the case, then switched-on durations of 5-10 should not be exceeded. Check after installation the operating temperatures. . Technical Specifications. Electrical: 4W reference power, 8 (12) V, 0.35A. Angle:> 160 °. Aperture: 50 Lumen RED. Aperture: 80 Lumen GREEN. Aperture: 100 lumens WHITE. Dimensional light cap: 11.5x42.5x10mm until 4mm sunk without loss of the radiation angle. Overall dimensions: 11.5x70x35mm. Weight: 8g (without cable). Delivery: enclosed with 1m silicone cable and pre-assembled ready for 2S resistor operation and resistance for 3S. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-PRO11X4R |
||
8Wx2 PURE light, Ultrapower - WHITE. Universal light with ultrapower as STROBE light only, for installation behind existing glass cap, mostly on wingtips, rudder or special DIY solutions. The module is being delivered completely prewired on a special shaped aluminium heatsink. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. In delivery state, these lamps must be operated only as STROBE light, pay attention to a slight air flow. Please check operation temperatures after installation and ensure sufficient air cooling. . Technical Data:. Electricity: 4W reference power, 8(12)V, 0.35A. Beam angle: ~160°. Light intensity: ~200 Lumen RED. Light intensity: ~300 Lumen GREEN. Light intensity: ~400 Lumen WHITE. Dimension bolt : D17x30mm. Dimension chip: D8mm. Weight: 2g (without cable). Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-PURE0802W |
||
4W PURE light, short - RED. Universal STROBE light for installation behind existing glass cap, mostly on wingtips or on the leading edge or special DIY solutions. The module is being delivered completely prewired on an aluminium heatsink. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. In delivery state, these lamps are only suitable for normal operation from 5 to 10 minutes when paying attention to a slight air flow. Please check operation temperatures after installation and ensure sufficient air cooling. . Technical Data:. Electricity: 4W reference power, 8(12)V, 0.35A. Beam angle: ~160°. Light intensity: ~50 Lumen RED. Light intensity: ~70 Lumen GREEN. Light intensity: ~100 Lumen WHITE. Dimension bolt : D7x15mm. Dimension chip: D8mm. Weight: 2g (without cable). Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed, mounting screws. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-PUREX040R |
||
Lens for Spotlights, 20mm |
UNL-CAPSL20 |
||
PRO-Meduim Lighting Set V2. Professional lighting set with the best luminaires for your model. The set consists of a 4-Channel controller, landing lights, beacon light and combined position lights with ACL flash RIGHT and LEFT. The set is suitable for models from about 1.4 to 2.2m wingspan but also suits air crafts with thin wings. The system is directly operated with 2S Lipo. All luminaires are directly ready-for-use and merely have to be connected on the control module. The work for the model-maker is limited to laying or extending cables respectively. You can extend the set as desired with the individually available components. . Set consists of:. The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. . |
UNL-SETPRO-M2 |
||
8W Universal & Round Light - Red. Red 8W point light with two transparent polycarbonate caps (10mm and 24mm). The module is delivered completely wired-up on an aluminium retaining plate for cooling and mounting. Another small heatsink for an alternative mounting with smallest dimensions is included. In case of longer operation, please pay particular attention to the temperatures. With the 8W module, we recommend the useage of a cooling plate AND heatsink. You only have to glue on the desired cap and heatsink with superglue. The 10mm cap serves as light distribution concerning the concealed installation behind a GFK wall. The 24mm cap can be used for external installation for it completely covers the module. The accessory includes a profile expansion in polycarbonate, which can be optionally glued on the 10mm cap. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. Continuous operation with the provided cooling elements is possible when paying attention to a slight air flow. Please check operation temperatures after installation. . Technical Data. Electricity: 8W reference power, 8(12)V, 0.7A. Beam angle: >160°. Light intensity: ~80 Lumen RED. Light intensity: ~140 Lumen GREEN. Light intensity: ~200 Lumen WHITE. Dimension base plate: 20x50mm. Dimension additional heatsink: 15x15x6mm, self-adhesive. Small cap: D10x12mm + profile expansion. Big cap: D24x10mm. Weight: 8g (without cable). Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed. . The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating. Note: The LED lights are extremely bright! Never look directly into a LED!. |
UNL-RND8R |
||
socket / plug clip holder extra slim Clip for male and female connectors to secure extra slim Width can be adjusted through the slot. No regards which plugs / sockets... |
STV-01216 |
||
Sorry, but you do not have permission to view this content.
|
UNL-DUAL1417RW |
||
Sorry, but you do not have permission to view this content.
|
UNL-DUAL6F-XX |
||
10mm PIN navigation light 40x2W, T-Fuse - White |
UNL-PIN10F40X2W |
||
Light Caps Micro Series Set of polycarbonat caps form the micro 5/7mm serias. this set consists of 4 BAR and 2 PRO caps |
UNL-CAPS-MICRO |
||
5mm Light BAR, 3Wx2 RED Functional optimized navigation light with outstanding light performance for all sport applicatons. Perfectly suitable for small smulticopter, sport-jets and aircrafts, trainer helicopters, gliders,… The slim... |
UNL-BAR532R |