Accessories
Showing 1–24 of 33 results
Filters
Sort results
Reset
Apply
10cm (5″) 22AWG twisted male to male servo lead Dreamworks Premium grade male to male servo leads. Available in 10 or 5 pks. DW-5-M2M   sku. (5pk) DW-10-M2M sku  (10pk.)... |
dw-5-M2M |
||
 Univerasal suiteable and on weight optimized cable for Lightsystems, servos and bus lines. |
UNL-CABLE5.0 |
||
Heat conductive glue 5g. Heat conductive glue, white, similiar to silicone, 5g. Less expensive alternative to the silver based 2-component glue. 5g tube. |
UNL-GLUE5G |
||
Y-Cable. Ready assembled adapter cable with 1m length in order to operate two lights directly on the controller output without soldering. |
UNL-CABLEY |
||
UniLight Wire Extensions . Extension for cables of the uniLIGHT System. every package contains two siliconcable with medium cross section, each with Male- and Female-Connector and a piece of shrinking hose for the fuse. |
UNL-CABLEXT10 |
||
Light Caps for smaller Profile Lights. A set of different light caps for self-building of luminaires and for covering of easy illuminants on your model. The caps consist of high-quality polycarbonate in contrast to deep-drawn products. They are impact resistant, much more temperature-resistant and varnishable. The set includes following caps:. 2 piece profile form slim 11mm. 3 piece round with 10mm. 2 piece of additional profile expansion. |
UNL-CAPSPRO |
||
Cable Set uniLIGHT. Our recommended cabling. The set contains a very robust and heat-resistant, twisted cables. One bundle of 3m cable and three bundles of 1m with an universal connector. The cable weight is 10g/m. |
UNL-CABLE |
||
Locking cable connection, 6 primary 10 secondary pins |
UNL-CABLE-6P10S |
||
UniLight Do It Yourself Crimp Connectors. |
UNL-CABLECONNECT |
||
Lens for Spotlights, 20mm |
UNL-CAPSL20 |
||
socket / plug clip holder extra slim Clip for male and female connectors to secure extra slim Width can be adjusted through the slot. No regards which plugs / sockets... |
STV-01216 |
||
Light Caps Micro Series Set of polycarbonat caps form the micro 5/7mm serias. this set consists of 4 BAR and 2 PRO caps |
UNL-CAPS-MICRO |
||
Light Caps for Point Lights. A set of five small 10mm and 2 large 24mm, round light caps for self-building of luminaires and for covering of easy illuminants on your model. The caps aren't deep-drawn but made of high-quality injected polycarbonate, they are impact resistant and unbreakable as well as varnishable. |
UNL-CAPS-PT |
||
Tap Terminals. High-quality Cable Tap Terminals. These tap terminals are simply pushed onto the first cable without the need of disconnecting it. The second cable is plugged in and the connector pressed to close with a tong. For cables from 0,4 bis 0,9mm². 10x12x6mm with clamping function, set of 10 pieces. |
UNL-SPLIT |
||
Lens for Spotlights, 26mm |
UNL-CAPSL26 |
||
West System Reusable Mixing Sticks-8ea |
WS-804-8 |
||
cable holder flat back Professional servo cable holder, flat for 2-3-core cables. Black (width 3,0 mm) For 1-2mm² cable, the brackets are best glued with thin liquid glue, (cables are... |
STV-01221 |
||
Lens for Spotlights, 40mm |
UNL-CAPSL40 |
||
Lens for Spotlights, 35mm |
UNL-CAPSL35 |
||
STV-01210/ Ribbon cable 10 mm Dreamworks 10mm ribbon cable holder |
STV-01210 |
||
Wing Wiring Kit - 3.0 Meter. Optimized wiring of lightsystems with wings. NEW ! cable with different profile causes the best performancce on minimal weight.This 4-pole cable is made out of a very strong live wire, neutral wire for the main load(Strobe/Spotlight) and two thin conducter for side-functions. Two cables for wings made from 4-pole Teflon for combilights and spotlights and connector, coding: orange, black, gray, white. . |
UNL-CABLELIGHT3.0 |
||
Resistor for LiFePo - 040 (4Watt) Package. Necessary resistors to replace the standard 2S Lipo with a 3S LiFe (9.9V) battery. The bag contains resistors for 040, 080 OR 120 lights and must be soldered additioally into the cable. 020 lights: includes 10 resistors. 040 lights: includes 10 resistors. 080 lights: includes 6 resistors. 120/160 lights: includes 4 resistors. |
UNL-RESIST-LiFe4W |
||
SPMA9594 BATTERY DOOR DX9/ iX12 OEM REPLACEMENT FOR BATTERY DOOR. |
SPMA9594 |
||
Extremely powerful and compact flat light for installation behind existing glass moldings on thin vanes or tail units. Version in the powerful x2 technology with integrated thermal fuse. The module... |
UNL-FLATF080X2RT |
||
Ribbon Cable 8 mm Cable holder for ribbon cable 8 mm Cable holder for ribbon cable 8 mm in width, now the rigid cable can finally embarrassed easily and also... |
STV-01223 |
||
Wing Wiring Kit - 2.0 Meter. Optimized wiring of lightsystems with wings. NEW ! cable with different profile causes the best performancce on minimal weight.This 4-pole cable is made out of a very strong live wire, neutral wire for the main load(Strobe/Spotlight) and two thin conducter for side-functions. Two cables for wings made from 4-pole Teflon for combilights and spotlights and connector, coding: orange, black, gray, white. . |
UNL-CABLELIGHT2.0 |
||
UniLight Afterburner Ring Replacement Cooler (Heatsink). Cooling ducts for our afterburner rings as spare parts or for expanding the RINGX-Series. |
UNL-RINGCOOL |
||
Lens for Spotlights, 15mm |
UNL-CAPSL15 |
||
Lens for Spotlights, 12mm |
UNL-CAPSL12 |
||
Resistor for LiFePo - 120-160 (12/16Watt) Package. Necessary resistors to replace the standard 2S Lipo with a 3S LiFe (9.9V) battery. The bag contains resistors for 040, 080 OR 120 lights and must be soldered additioally into the cable. 020 lights: includes 10 resistors. 040 lights: includes 10 resistors. 080 lights: includes 6 resistors. 120/160 lights: includes 4 resistors. |
UNL-RESIST-LiFe16W |