Uncategorized
Showing all 23 results
Filters
Sort results
Reset
Apply
Unilight 26mm Alu-Spotlight, 4W
Flat spotlight with CNC manufactured aluminium reflector with 26mm diameter. Ideal on gears or as drop-out spotlights. The spotlight can be directly glued on the undercarriage leg with thermal conductive adhesive to allow long time operation. Without airflow operation of 5-8 minutes are possible without problems.
Direct operation with 2S LiPo (8V). With 3S (12V), the additional resistor has to be soldered in or use a 4W connection cable (accessories). Please ensure sufficient cooling air during operation. |
UNL-SPOT26X4 |
||
High Voltage Coreless Digital Servo w/ Soft Start, 0.10sec / 624.9oz @ 8.4V |
SAV-SV1270TGP |
||
DigiTech Fuel Fitting Set for 8mmtubing. |
DIG-FFSET8 |
||
By installing the one-touch nipple, the fuel tank can be configured easily and conveniently by installing only this product on the lid without making a hole in the fuel tank.... |
SC-RFCV2(NEW)-R |
||
Unilight 24mm PRO Navigation Light, 24Wx2, T-Fuse RED
Power flash light in the 24mm series with a new chip!
The well-known 24mm series has got a new flash light with up to 1700 lumens. The housing was equipped with the chips from the round light and thus replaces the PRO24F-200x2. Huge light output with a compact design and integrated temperature protection. They are supplied with a screwed-on 24mm profile cap made of highly transparent polycarbonate. With the faceted cap there is a perfect radiation over the entire horizon, without the cap, the installation in fuselage openings and prefabricated recesses can be done very easily. |
UNL-PRO24F242R |
||
JetCat Data Cable, 70cm (29″) |
JC-A1033 |
||
FADEC Data Terminal for the NEW Xicoy (Gaspar)Fadec SBUS ECU. Servo lead conenction. NOT COMPATIBLE WITH OLD FADEC. |
JM-SBUSGSU |
||
10mm PIN Strobe Light, 8x2W, T-Fuse Electricity: 8W reference power, 8(12)V, 0.6A Beam angle: >160° Light intensity: ~250 Lumen RED Light intensity: ~350 Lumen GREEN Light intensity: ~500 Lumen WHITE... |
UNL-PIN10F80X2G |
||
Unilight 24mm PRO Navigation Light, 24Wx2, T-Fuse GREEN
Power flash light in the 24mm series with a new chip!
The well-known 24mm series has got a new flash light with up to 1700 lumens. The housing was equipped with the chips from the round light and thus replaces the PRO24F-200x2. Huge light output with a compact design and integrated temperature protection. They are supplied with a screwed-on 24mm profile cap made of highly transparent polycarbonate. With the faceted cap there is a perfect radiation over the entire horizon, without the cap, the installation in fuselage openings and prefabricated recesses can be done very easily. |
UNL-PRO24F242G |
||
Locking cable connection, 9 primary 4 secondary pins |
UNL-CABLE-9P4S |
||
Hitec D955TW Titan Gear Monster Tourque Servo |
HRC36955 |
||
Free Flight model Made of Flexipor Felix iQ XL
Colors may vary |
MINI-FelixiQ-xl |
||
Long Dual Servo Arms (Long Hitec), 2 pk. |
DUB-3342 |
||
Profiled strobe light in compact shape. |
UNL-PRO14260W |
||
Battery Balance Adapter, 4 Pin to 3 Pin |
JC-A1021-ADP-4/3 |
||
L12-R Micro Linear Actuators for RC The L12-R series of small linear servos operate as a direct replacement for standard rotary servos. They use the same standard 3 wire connector,... |
ACT-L12R3210 |
||
PowerBox PowerPak 2500mah Lilon batteries X 3 |
PBX-2535 |
||
Dremel 110 pc Super Rotary Accessory Kit. This 110-piece accessory kit provides the organized storage of popular Dremel accessories to perform a wide range of applications. This accessory set offers reusable storage bins and lift-out trays for easy organization of the included bits for cutting, grinding, polishing, sanding, cleaning and more. The kit consists of regular and heavy-duty cut off wheels, sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench, and a reusable carrying case with clear lid. 110 Pieces - A complete start-up kit for the Dremel rotary tool user. . |
DRE70902 |
||
JR Servo Extension 18" Heavy Duty, Gold. |
JRPA099 |
||
Product Description. Key Features. . Overview. The UMX™ Carbon Cub SS float set is a great option that adds even more excitement to your RC flight experience. This lightweight, molded foam float set includes everything needed to complete the floatplane conversion. Assembly and installation take only minutes. The rugged wire struts assure the proper stance on the water for smooth tracking and easy takeoffs from the water. |
EFLUA1190 |
||
1/8 Hose Barb Valved Panel Mount Coupling Insert. (6mm Tubing). See also Part# JF-18B. |
JF-18I |
||
1/8 Hose Barb Valved Panel Mount Coupling Body. (6mm Tubing). See also Part # JF-18I. |
JF-18B |
||
USB interface cable allows you to connect your FADEC ecu to a PC. |
JM-USB |