Digital
Showing 1–24 of 39 results
Filters
Sort results
Reset
Apply
 |
This is the Savox SB-2252MG Super Speed 6.0V Brushless Standard Size Steel Gear Digital Servo. Safe when used wth A123 and LiFe batteries |
SAV-SB2252MG |
|
 |
A5030 Mini Digital Aicraft Servo. . . . . |
SPMSA5030 |
|
 |
A6180 Digital Aircraft Servo. . . . . . |
SPMSA6180 |
|
 |
MKS HV747 Coreless Mini High Torque 8.4V Digital Servo. See aditional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HV747 |
|
 |
HV1220 Digital High-Torque High Voltage Servo, with Titanium Gears, by MKS. See additional photos for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HV1220 |
|
 |
Whoever said that size doesn't matter was right! When talking about the SC1251MG we think about the saying "It's not the size of the dog in the fight, it's the size of fight in the dog." Combining full metal gears and amazing speed, the low-profile dimensions of this servo makes it perfect for any vehicle that is cramped for space or those looking to save additional weight. Safe for use with A123 and LiFE batteries . |
SAV-SC1251MG |
|
 |
HS-5696MH High Torque digital servo |
HRC35496S |
|
 |
HV69, the one you have been waiting for. |
MKS-HV69 |
|
 |
MKS DS1220 Titanium Gear Ultra High Torque Standard Digital Servo with 422oz @ 6.6v. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-DS1220 |
|
 |
MKS HV6130H Thin Digital Servo. Dead Band 0.001 ms. Control System +Pulse Width Control. Working Frequence 1520μs / 333Hz. Operating Voltage 3.5~8.4 V DC Volt (2S Lipo un-regulated). Operating Speed (6V) 0.14 sec/60° degrees at no load. Operating Speed (7.4V) 0.11 sec/60° degrees at no load. Operating Speed (8.4V) 0.10 sec/60° degrees at no load. Stall Torque (6V) 6 Kg/cm (83 oz/in). Stall Torque (7.4V) 7.6 Kg/cm (105.5 oz/in). Stall Torque (8.4V) 8.1 Kg/cm (112.5 oz/in). Motor Type Coreless Motor. Potentiometer Drive Direct Drive. Bearing Type 3x Ball Bearings + 2x Jewel Bearing. Gear Type Metal Alloy gear. Dimensions 30x10x29.8 mm (1.1811X0.39X1.17 in). Weight 23g (0.81oz). See additional images for dimensions. . |
MKS-HV6130H |
|
 |
MKS HV1250 Coreless High Speed 8.2V Digital Servo. See additional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline.SKU MKS-HV1250. . |
MKS-HV1250 |
|
 |
HV777A+ Aluminum upper Casing (0.1 sec/60° - 40.40 kg.cm (561.1 oz/in) @8.2V). |
MKS-HV777A+ |
|
 |
Digital weight and balance meter. Same features and operation than the standard model, but replacing the color computer to a wireless Bluetooth module, to use an Android/Apple phone as a computer. |
JM-CGMETER-B1 |
|
 |
MKS HBL575SL X6 High Torque 8.2V Brushless ServoSKU MKS-HBL575SL. See additional images for dimensions. Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HBL575SL |
|
 |
HBL599 Digital Brushless Ultra Speed/Torque High Voltage Servo, w/Titanium Gears, by MKS. See additional images for dimensions. . Note: All Standard and mini servos except the X8 range (HBL380, HBL850, HBL880) use a 6mm 25tooth spline, same as Futaba. Micro and wing servos all use a MKS 5mm spline. |
MKS-HBL599 |
|
 |
Powerbox Digital Switch MPX/JR 7.4V |
PBX-6421 |
|
 |
Digital LiPo Voltage Checker. |
INTC23022 |
|
 |
HS-5585MH is a Digital , High Voltage servo that is good for Jets,3D, Warbirds , and all of your Giant scale needs. |
HRC35585S |
|
 |
A4010 Micro Digital Aircraft Servo. . . . . |
SPMSA4010 |
|
 |
The SC1256TG pushes 277.2 oz of torque and this servo is perfect for those who are running a 4x4 short course truck and don't want to blow their whole wad on their servo. The SC-1256TG sports titanium and metal gears to keep things strong and running smooth. Features:. Compare With - Futaba: BLS351; Hi-Tec: HRC37955S; JR: DS8411; Spektrum: H6040. |
SAV-SC1256TG |
|
 |
A4030 Micro HV Digital Hi-Torque MG Aircraft Servo. . . |
SPMSA4030 |
|
 |
This is the Savox SG-0351 Standard Digital Servo , 57oz of Torque @ 6V .. . . |
SAV-SG0351 |
|
 |
This high torque steel geared servo is also high voltage. Now you can run an unregulated LiPo battery for extreme torque! The SC-1268SG is the high torque servo you always dreamed of. Best used for 1/8th scale nitro racing and can push 347.2 oz. of torque. Perfect for Jets, 3D , Warbirds , and all Giant Scale aircraft.. . |
SAV-SC1268SG |
|
 |
This is the Savox SC-0352 Standard Size Digital Servo. Safe when used with A123 and LiFE batteries . . |
SAV-SC0352 |
|
 |
This is the Savox SC-0254MG High Torque Standard Size Digital Servo. Safe when used with A123 and LiFE batteries.. |
SAV-SC0254MG |
|
 |
This is the Savox SC0253MG Metal Gear Digital Servo. Safe when used with A123 and LiFE batteries.. |
SAV-SC0253MG |
|
 |
The SB2271SG combines leading edge technology with super high 12-bit (4096) resolution and full aluminum gears for one amazing servo! This servo uses a brushless motor providing high speed, incredible efficiency, and low power consumption. The extremely strong aluminum gears ensure long-life and durability. High-voltage-capable for running direct LiPo receiver packs. Ideal for rock crawlers and steering servo on 1/8-scale buggies. |
SAV-SB2271SG |
|
 |
This is the Savox SB-2230SG High Voltage Monster Torque Brushless Tall Size Steel Gear Digital Servo. Perfect for Jets, 3D , Warbird , and Giant Scale aircraft.. |
SAV-SB2230SG |
|
 |
The SA1258TG combines leading edge technology with super high 12-bit (4096) resolution and titanium and aluminum gears for one amazing servo! With titanium and aluminum gears, this servo is truly magical. Pushing 167 ounces of torque and a blistering .08 transit time, this servo is redefining what an all-around servo should be capable of. This is a great upgrade to most comparably priced servos. The minimized backlash on the SA1258TG is helpful in plane wings for greater accuracy and less gear play. |
SAV-SA1258TG |
|
 |
This is the Savox SA-1231SG High Torque Steel Gear Digital Servo, safe when used with A123 or LiFe batteries . Perfect for Jets, 3D , Warbirds and all Giant scale aircraft.. |
SAV-SA1231SG |