Description
10Wx2 Navigation & Strobe, 16mm – Red/White
Powerful positioning and flashlight in one housing. The profile of 16mm light series is drop-shaped and fits on many mittlelgroße models where the model even position lights are available. The profile-shaped polycarbonate cap is screwed and changeable. If no air convection at the cooling plate is possible, the enclosed cooling pins are optional
The luminaire is fully assembled for use with 2S LiPo (about 8V). During operation with 3S (12V) of the enclosed resistor must be used. Please note that high-power LEDs can be very warm, up to 70 ° C is quite normal. These luminaires with heatsink enclosures are suitable for continuous operation, when an air flow is possible (in flight). If this is not the case, then switched-on durations of 5-10 should not be exceeded. Check after installation the operating temperatures.
Technical specifications:
Electrical: 4Wx2 RED / GREEN 0.35A and 0.5A 6Wx2 WEISS reference power, 8 (12) V
Angle:> 160 °
Aperture: ~ 100 lumens RED
Aperture: ~ 160 lumens GREEN
Aperture: ~ 320 lumens WHITE
Dimensions baseplate: 16x37mm
Overall dimensions: 17x38x9mm
Weight: 6g (without cord)
Delivery: enclosed with 1m silicone cable and pre-assembled ready for 2S resistor operation and resistance for 3S
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
