Unilight Battery Elimination Circuit Module10A


Unilight Battery Elimination Circuit Module10A

1 in stock

SKU: UNL-BEC10A Category: Tags: , , , , ,


Unilight Battery Elimination Circuit Module10A

UniLights BEC module (Battery Elimination Circuit) was specially developed for use with the uniLIGHT.at lighting systems and offers high performance with very small dimensions.

With the module the necessary, constant voltage of 8V (equivalent to 2S LiPo) can be generated directly from a flight battery (up to 40V). For this purpose, only the power supply has to be plugged in to the module, then the light system can be operated directly at the output. Due to the galvanic isolation of the uniLIGHT controllers, no disturbances in the reception area can occur. It is possible to power quite strong systems with 6A continuous current and 10A peak current.

In addition, this BEC module offers even more adjustment options through small switches on the side.

Switch A   DAY/DEMO
Switchover between day mode 8V and the greatly reduced night and demo mode with 6.4V.
Please note that the demo operation reduces the brightness, but that no infinite operation is possible. Please always check the operating temperatures.

Switch B   HIGH/LOW
Switches between full power (8.4V / 7.4V) and slightly reduced voltage (8.0V / 6.4V) in each operating range.
Note that with DAY + HIGH position the lights are supplied with maximum operating voltage. They are optimally bright, but also warm accordingly.

Operating voltage input: up to 40VDC
Output electricity constant: up to 6A
Hightest electricity: 10A
Output voltages: 8.4V / 8.0V / 7.4V / 6.4V
Weight (without cable): appx. 15g
Dimensions: 45x45x10mm
Scope of delivery: JST BEC Kabel M/F, mounting clips

Additional information

Weight 0.01 lbs